All-in-One Support

Main features

• Shape retention for circular ducts

• Prevents the duct from collapsing when there is no airflow

• Covers up to 180° of the duct circumference

• Significantly reduces installation and maintenance time

• Delivered pre-installed from the factory for ducts up to Ø1220 mm

Description

• All-in-one  hangers consist of semi-circular consoles and helps the duct from collapsing in the middle when there is no airflow.

• Ducts with the All-in-one option come with the hangers pre-installed from the factory, which significantly reduces installation time compared to systems offered by other manufacturers. This also means reduced maintenance work as they can be easily removed and re-mounted, e.g. in connection with maintenance.

• The hangers are placed in sewn-in pockets on the outside of the duct at fixed intervals. The size of the hanger depends on the diameter of the duct.

• AiO hangers cover 180° of the duct circumference up to Ø1220. For diameters above Ø1220, the size of the hanger is reduced due to transportation restrictions.

• All-in-one provides additional support for 90° bends.

• The hangers are made of anodized aluminum.


• The accessory is available as an option for circular duct profiles and textile ducts in the FabricAir® ventilation system.
• The accessory can be used for both ducting sections and in diffuser parts.


• The hangers are made of anodized aluminum with steel brackets, nuts and bolts, and POM (acetal) slider fittings.


• All-in-One Support (AiO) come pre-installed from the factory.

• The semi-circular hangers are sewn into pockets on the exterior of the duct at fixed intervals.

• The hangers are easy to remove and re-install for maintenance purposes, as they slide into the pocket with an opening at the 9 (15) o’clock position of the circumference of the duct.

• The AiO Support will cover 180° of the duct’s circumference up to Ø1220 mm.

• For diameters above Ø1220 mm, hanger coverage decreases due to shipping constraints.