KV [e]
Main features
• Extract air diffuser for small air flows – “control valve”
• For residential ventilation, e.g. wardrobes, bathrooms, etc.
• Low inherent noise
• Withstands large pressure drops
• Easy mounting and dismantling in walls or ceilings
• Fits in short bends
Description
• This product has been discontinued and replaced by KV version f, KV [f]
• Extract air control valve-type air diffuser diffuser, suitable for most types of premises.
• Designed for low airflows small spaces, e.g. wardrobes, storage rooms, etc.
• Suitable for residential ventilation, e.g. toilets, bathrooms, walk-in closets and wardrobes.
• The opening for the cone adjustment is concealed by a plastic plug.
Product sizes (mm):
Ø100
Ø125
Ø160
Accessories
• RAM-KV: Mounting frame with spigot connection, size Ø80-200.
• RAM-KV-M: Mounting frame with socket connection, size Ø100-200.
• RAM-KV-B: Conversion frame using a bracket attachment for mounting circular control valves, type KV / KLK, in rectangular ducts in older buildings, size Ø100-125.
• RAM-KV-F: Conversion frame using a spring attachment for mounting circular control valves, type KV / KLK, in rectangular ducts in older buildings, size Ø100-125.
• MSD: Mounting lock to ensure that the device sits flush against the mounting surface and does not gap, e.g. suspended ceiling panel, size Ø80-200.
• Powder-coated steel sheet in white RAL standard color.
• Polyester sealing.
• Produktet er beregnet til montering i loft eller på væg.
• Produktet monteres i en monteringsramme, konverteringsramme eller direkte i en cirkulær kanal.
• Passer i kanaldele med kort strækning.
• Enheden monteres og afmonteres ved at dreje den med uret.
• Tilbehør RAM-KV og RAM-KV-M (muffe) fastgøres med skruer.
• Til renoveringsprojekter findes også konverteringsrammerne RAM-KV-B (bøjle) og RAM-KV-F (fjeder) som tilbehør. Konverteringsrammerne dækker huller, når en brødrister-type ventil skal udskiftes.
• Enheden indreguleres ved hjælp af en målesonde.
• Efter indregulering demonteres armaturet. Ventilkeglens position låses med møtrikken på spindlen, hvorefter armaturet genmonteres.